
Baltic Birch Dovetail Drawer Box
Description
You’ll notice the pure craftsmanship in our Baltic Birch Drawer Box made with Dovetail joinery. Heavy Duty and Beautiful, too!
- 5/8″ (15mm) 11-ply Baltic Birch plywood sides, Dovetailed at the corners
- 3/8″ engineered core plywood bottom; Flat, stable, and Strong (not 1/4″ like most competitors)
- 1/2″ Bottom Recess; Ready for Undermount OR Side mount drawer slides
- Optional rear notching available for Assembled Dovetails that are 9, 12, 15, 18, 21, 24, and. 27″ deep. Works for undermount slides up to 2-1/4″ wide.
- Width: 6.75″-38″; Depth: 7.25″-28″; Height: 2.625″- 11″
- Eased edge on top of sides
- Shipped to you Ready-to-Assemble, Sand, and Finish. Or, choose Assembly and Clearcoat finishing.
UNASSEMBLED BOXES REQUIRE SOME WOODWORKING SKILLS TO ASSEMBLE. THIS MAY INCLUDE FITTING DOVETAILS, GLUING, FILLING, AND SANDING. IF YOU ARE UNSURE, FACTORY ASSEMBLY IS A GREAT VALUE! Dovetails MUST be assembled as soon as you receive them. Changes in relative humidity will greatly affect the wood. Products ordered unassembled can not be returned for failed assembly.





















Paul (verified owner) –
The drawer order was filled in about 3 weeks. It was well made, the birch plywood is high quality. It wasn’t hard to assemble. The bottom is birch laminated MDF, not plywood, but the look is identical to plywood and since it is 3/8” thick, more satisfyingly solid than 1/4” plywood would have been. I would order this again.
Thomas Clauset (verified owner) –
I bought 3 drawers — birch plywood, unsanded and unassembled. The video on your Cabinet Door Store website shows the dovetailed box drawers going together easily with just a bit of glue to make the joints tight. This is deceptive marketing. I found that in order to get the dovetailed joints to fit together, each joint on each piece of wood (12 pieces) had to be carefully sanded to remove stray wood fibers and to smooth the joint surfaces. I sanded all edges and both sides of the dovetails on each piece of wood. In addition I sanded the drawer bottom slot sides. Also, I used an orbital sander to slightly bevel all sides of the large bottom sheet (on both sides) so that the bottom sheet would fit into the slots when building the finished drawer. Only then would the dovetailed sides and bottom fit together — with LOTS of pounding with a rubber mallet on the dovetails to make them “seat” into the sockets. I did use wood glue as per the directions in the assembly video. The assembled drawers look good now and are ready to accept stain and final top coat. I would have preferred reading a thorough description of how to prepare the pieces for assembly, rather than having to figure it out on my own. Although the video did show the proper order to complete the assembly, it totally left out the preparation work that needed to be done on each piece. I give the video the grade of D-
Jim Malone (verified owner) –
Jonathon (verified owner) –
Great build quality and a good price. You can’t go wrong selecting this drawer box.
Melvin (verified owner) –
I got 4 drawers completely finished at a custom size for a very reasonable price. They look and fit great. Very happy. Wife loves them.
James Willner (verified owner) –
Curt (verified owner) –
One of the sides of the drawer was split. I had to glue and resand it
cabinetdoor –
Hi Curt!
Thanks for the feedback! This is the first we’ve heard of this issue. So sorry to hear you had trouble! We are more than happy to take care of mistakes or shipping damage when they occur.
Please send photos of the issue to [email protected]
Anonymous (verified owner) –
A little pricey but very well constructed with good wood. Would have given a 5 had there been options included for installation rollers, etc.
Joy Beatrice (verified owner) –
Beautifully built. Solid construction.
Anonymous (verified owner) –
Looks good but I still need to put it together.